|
|
|
|
|
|
4.2 L Cylinder Head Nut Washer (Thick) C10301
|
|
|
4.2 L Cylinder Head Nut Washer (Thick)
Jaguar part number C10301
Fits all early 4.2L engines up to 1987
Good Clean Used Part.
|
|
|
|
|
|
|
|
|
|
4.2 L Cylinder Head Nut Washer (Thin) WA600071
|
|
|
4.2 L Cylinder Head Nut Washer (Thin)
Jaguar part number WA600071
Fits all early 4.2L engines up to 1987
Good Clean Used Part.
|
|
|
|
|
|
|
|
|
|
4.2 L Camshaft Bearing Cover Stud C2326
|
|
|
4.2 L Camshaft Bearing Cover Stud
Jaguar part number C2326
Fits all 4.2L engines up to 1987
Good Used Original Part.
|
|
|
|
|
|
|
|
|
|
3.4 3.8 4.2 XK Engine Manifold Stud C11761
|
|
|
3.4 3.8 4.2 XK Engine Manifold Stud
Jaguar part number C11761
For use on all pre 1987 engines.
Both Inlet and Exhaust sides.
Good, Clean Original Used Part
|
|
|
|
|
|
|
|
|
|
3.4 3.8 4.2 XK Engine Timing Cover Stud C2189
|
|
|
3.4 3.8 4.2 XK Engine Timing Cover Stud
Jaguar part number C2189
This is on the underside of the head.
Approx 5/16" diameter by 2" long.
Fits all Jaguar engines up to 1987
Good Clean Original Used Part
|
|
|
|
|
|
|
|
|
|
4.2 L Cam Cover Dome Nut C2327
|
|
|
4.2 L Cam Cover Dome Nut
Jaguar part number C2327
Fits all early 4.2L engines to 1987
Stainless Steel. Good Used Part.
|
|
|
|
|
|
|
|
|
|
3.4 3.8 4.2 XK Cylinder Head Breather Stud C6727
|
|
|
3.4 3.8 4.2 XK Cylinder Head Breather Stud
Jaguar part number C6727
On cars with the carbon canister, this is the shorter Stud - About 1 5/8".
Fits all Jaguar engines up to 1987
Good Clean Original Used Part
|
|
|
|
|
|
|
|
|
|
4.2 L Camshaft Sprocket Bolt Setscrew C33918 JZB100042
|
|
|
4.2 L Camshaft Sprocket Bolt Setscrew
Jaguar part number C33918 (JZB100042)
Fits early 4.2L engines to 1987
Good Clean Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XJS Fulcrum Set Screw C17009 JZS100088
|
|
|
Fulcrum Set Screw
Jaguar part number C17009 (JZS100088)
This is the longer of the bolts used on the Fulcrum mounting.
Fits most Early Jaguar Independent Rear Suspensions.
Nice Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XJS Fulcrum Set Screw C17010 JZS100089
|
|
|
Fulcrum Set Screw
Jaguar part number C17010 (JZS100089)
This is the shorter of the bolts used on the Fulcrum mounting.
Fits most Early Jaguar Independent Rear Suspensions.
Nice Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJS XKE Cam Oil Feed Line Banjo Bolt C5846
|
|
|
XJ6 XJS XKE Cam Oil Feed Line Banjo Bolt
Jaguar part number C5846
Fits Early sedans, XKE, XJ6 and XJS.
Good Used Part.
|
|
|
|
|
|
|
|
|
|
Exhaust Manifold Gasket - All 4.2L .. C2318 JA272
|
|
|
Jaguar Exhaust Manifold Gasket.
Payen part number JA272, Jaguar part number C2318.
Fits all 4.2L engines.
New, out of package.
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XJS Suspension Bolt C17024 JZS100090
|
|
|
XJ6 XJ12 XJS Suspension Bolt
Jaguar part number C17024 (JZS100090)
Special bolt that goes through IRS cage and into the differential.
Used on most pre 92 Jaguar Independent Rear Suspensions.
Nice Used Part.
|
|
|
|
|
|
|
|
|
|
XJ6 XJS XKE Sedan Brake Pedal Pad C21515
|
|
|
Brake Pedal Pad
Jaguar part number C21515
4.5" pad used on XJ6 XJS XKE and some early Sedan Auto models.
Nice Used Part with no wear.
|
|
|
|
|
|
|
|
|
|
Jaguar Chrome Molding Clip BAC5298
|
|
|
Jaguar Chrome Molding Clip
Jaguar part number BAC5298
Sold in packs of 10
Used on most Jaguar models from the 60s to the late 80s
to hold interior chrome strips in place.
Good Used Condition
|
|
|
|
|
|
|
|
|
|
Jaguar Boot Lid Emblem BD26762
|
|
|
Jaguar Boot Lid Emblem
Jaguar part number BD26762
Fits all early Jaguars prior to 1980.
Good Used Authentic Emblem. All mounting pins present.
|
|
|
|
|
|
|
|
|
|
XJ6 XJS Fulcrum Shaft Distance Tube - C17663
|
|
|
Fulcrum Shaft Distance Tube
Jaguar Part number - C17663
Fits the 420, Etype, XJ6, XJ12 and XJS
Used part. Clean and Straight
|
|
|
|
|
|
|
|
|
|
3.8 4.2 L Camshaft Bearing Cap C2171
|
|
|
3.8 4.2 L Camshaft Bearing Cap
Jaguar part number C2171
Fits most early Jaguar engines up to 1987.
Normally these are matched to the head, but selling just in case of
loss or damage to the one you have.
Good Used Part.
|
|
|
|
|
|
|
|
|
|
3.8 4.2 L Camshaft Bearing Cap C2172
|
|
|
3.8 4.2 L Camshaft Bearing Cap
Jaguar part number C2172
Fits most early Jaguar engines up to 1987.
Normally these are matched to the head, but selling just in case of
loss or damage to the one you have.
Good Used Part.
|
|
|
|
|
|
|
|
|
|
3.8 4.2 L Crankshaft Main Cap Bolt C2262
|
|
|
3.8 4.2 L Crankshaft Main Cap Bolt
Jaguar part number C2262
Used on Engines prior to 1987
Good Used Part
|
|
|
|
|
|
|
|
|
|
XKE Early Sedan Limiter Rotor DRB111 C25328
|
|
|
XKE and Early Sedan Limiter Rotor DRB111 C25328 Lucas 54417627
For Lucas distributors #41296,
41297, 41323, 41065, 41322. In original Lucas box.
Fits Jaguar MK X
1965-66 w/auto trans, 1967 420G w/auto trans,
1970-71 XKE w/auto trans,
1970-71 XJ6 w/auto trans.
New old stock with shelf wear.
|
|
|
|
|
|
|
|
|
|
4.2L Plunger Pin and Spring - C4405 C2297
|
|
|
Jaguar 4.2L Plunger Pin and Spring
Part numbers C4405 and C2297
Good Used Parts
|
|
|
|
|
|
|
|
|
|
XJ6 XJS Lower Shock Mounting Shaft - C17013
|
|
|
Lower Shock Mounting Shaft
Jaguar part number - C17013
Fits the Jaguar IRS used in the 420, E type, XJ6, XJ12 and XJS
Nice used part, straight with good thread.
|
|
|
|
|
|
|
|
|
|
XJ6 420 Stype Coat Hook BD39621
|
|
|
XJ6 420 Stype Coat Hook
Jaguar part number BD39621
Used on the Series 1 & 2 XJ6 and XJ12 (69-78), 420 and early Stype.
Good Used Part.
|
|
|
|
|
|
|
|
|
|
Jaguar Terminal Post C22257 C45021
|
|
|
Jaguar Terminal Post
Jaguar part number C22257 C45021
Fits Jaguar XKE 1965 - 1974, E-Type 4.2 Series 1, Series 2 and Series 3
XKE V12, MKX, 420, XJ6 1969 - 1989 Up To VIN# 556850, XJ40, XJ12 1970 -
1992, XJS 1975 - 1992 Up To VIN# 179736
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XKE Sedan Starter Mounting Plate C22488
|
|
|
XJ6 XKE Sedan Starter Mounting Plate
Jaguar part number C22488
Used on various 4.2L engines including XKE, Early Sedans, and XJ6.
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJS Inner Fulcrum Shaft - C17008
|
|
|
Inner Fulcrum Shaft
Jaguar part number - C17008
Fits the Jaguar IRS used in the 420, E type, XJ6, XJ12 and XJS
Nice used part, straight with good thread.
|
|
|
|
|
|
|
|
|
|
4.2L Timing Adjustment Plate - C4404
|
|
|
Jaguar 4.2L Timing Adjustment Plate
Part number C4404
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XKE Turbo Hub Caps - C30283
|
|
|
XJ6 XJ12 XKE Turbo Hub Cap
Jaguar part number C30283
Fit any Jaguar rim that uses a 9" Hub Cap.
Used cap, in great condition. Some minor rust in the creases.
Otherwise very good.
|
|
|
|
|
|
|
|
|
|
4.2L Upper Timing Chain Bracket - C21703
|
|
|
Upper Timing Chain Bracket
Jaguar Part number C21703
Fits Jaguar 4.2 engines to 1987
Good, Used Part.
|
|
|
|
|
|
|
|
|
|
4.2L Eccentric Shaft - C27189
|
|
|
Eccentric Shaft
Fits inside Upper Timing Sprocket
For 4.2L engines to 1987
Jaguar part number c27189
|
|
|
|
|
|
|
|
|
|
4.2 L Idler Sprocket Shaft C26608
|
|
|
4.2 L Idler Sprocket Shaft
Jaguar part number C26608
Fits 4.2L engines to 1987
Good Used Part
|
|
|
|
|
|
|
|
|
|
4.2L Front Timing Chain Bracket - C4128
|
|
|
Jaguar 4.2L Front Timing Chain Bracket
Part number C4128
Clean, Used Part
|
|
|
|
|
|
|
|
|
|
4.2L Oil Pump - C21765
|
|
|
4.2 L 6 Cylinder Oil pump
Fits all 4.2L engines from 1956 – 1987
Jaguar part number C21765
Used Oil Pump, In good condition.
|
|
|
|
|
|
|
|
|
|
XJ6 XJS Differential Companion Flange RTC1009A
|
|
|
Differential Companion Flange
Jaguar part number RTC1009 or RTC1009A
Used on most early Jaguar Etype, S-type, 420, Mark 10, Series 1-3 XJ, and XJS.
Also fitted to Land Rover.
Not Used with Dana Differentials.
Used Part in Good Condition.
|
|
|
|
|
|
|
|
|
|
Early Jaguar Sedan Road Wheel
|
|
|
Early Sedan Road Wheel.
This is off a 3.4S. Will fit many models of the same era.
15"x5" steel rim.
Stock photo, condition varies from wheel to wheel.
Email for availability and further details prior to purchase.
|
|
|
|
|
|
|
|
|
|
4.2 L Crankshaft Main Cap Set C21692
|
|
|
4.2 L Crankshaft Main Cap Set
Normally sold with the engine, part numbers include C21692
Removed from a 1985 XJ6, will fit 4.2L engines to 1987
Good Used Set.
|
|
|
|
