|
|
|
|
|
|
XJS XKE Reverse Lamp Bulb - JLM9592 LLB270
|
|
|
XJS or XKE Reverse Lamp Bulb.
Jaguar part numbers JLM9592, 11740, or LLB270.
Fits Etype from 69-74, and XJS from 76-91.
New in package.
|
|
|
|
|
|
|
|
|
|
XJ6 XKE Water Pump Gasket - C28656
|
|
|
XJ6 XKE Water Pump Gasket
Jaguar part number - C28656
Fits: 6 Cylinder E-Type - 2+2 - 1969-1971 XJ6 1967-1987.
New, Paper Type Gasket.
|
|
|
|
|
|
|
|
|
|
4.2 L Cylinder Head Nut Washer (Thick) C10301
|
|
|
4.2 L Cylinder Head Nut Washer (Thick)
Jaguar part number C10301
Fits all early 4.2L engines up to 1987
Good Clean Used Part.
|
|
|
|
|
|
|
|
|
|
4.2 L Cylinder Head Nut Washer (Thin) WA600071
|
|
|
4.2 L Cylinder Head Nut Washer (Thin)
Jaguar part number WA600071
Fits all early 4.2L engines up to 1987
Good Clean Used Part.
|
|
|
|
|
|
|
|
|
|
4.2 L Camshaft Bearing Cover Stud C2326
|
|
|
4.2 L Camshaft Bearing Cover Stud
Jaguar part number C2326
Fits all 4.2L engines up to 1987
Good Used Original Part.
|
|
|
|
|
|
|
|
|
|
3.4 3.8 4.2 XK Engine Manifold Stud C11761
|
|
|
3.4 3.8 4.2 XK Engine Manifold Stud
Jaguar part number C11761
For use on all pre 1987 engines.
Both Inlet and Exhaust sides.
Good, Clean Original Used Part
|
|
|
|
|
|
|
|
|
|
3.4 3.8 4.2 XK Engine Timing Cover Stud C2189
|
|
|
3.4 3.8 4.2 XK Engine Timing Cover Stud
Jaguar part number C2189
This is on the underside of the head.
Approx 5/16" diameter by 2" long.
Fits all Jaguar engines up to 1987
Good Clean Original Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJS XJ12 Flywheel Flexplate Driveplate Bolt C6839
|
|
|
Flywheel Flexplate or Driveplate Bolt
Jaguar part number C6839
Used on various models of XJ6, XJ12, XJS and XKE
Shorter than C4855, on the earlier XJ6.
Used part in good condition.
|
|
|
|
|
|
|
|
|
|
XJ12 Etype Inlet Manifold Stud C8511
|
|
|
XJ12 Etype Inlet Manifold Stud
Jaguar part number C8511
Used on Carbureted 5.3L engines
Approx 2"
Good Used Part
|
|
|
|
|
|
|
|
|
|
V12 LH Timing Cover Gasket - EBC3280 EBC9632
|
|
|
V12 Left Hand Timing Cover Gasket.
Jaguar part number EBC3280, supersedes to EBC9632.
Fits all Jaguar V12 engines - XKE, XJ12, XJS, XJ40, and X300.
New, sold each....
|
|
|
|
|
|
|
|
|
|
4.2 L Cam Cover Dome Nut C2327
|
|
|
4.2 L Cam Cover Dome Nut
Jaguar part number C2327
Fits all early 4.2L engines to 1987
Stainless Steel. Good Used Part.
|
|
|
|
|
|
|
|
|
|
XJS XJ12 Etype Cylinder Head Stud C29437
|
|
|
XJS XJ12 Etype Cylinder Head Stud
Jaguar part number C29437
Used on 5.3L engines prior to the early HE engine.
Approx 1.5"
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJ12 Etype Inlet Manifold Stud C24025
|
|
|
XJ12 Etype Inlet Manifold Stud
Jaguar part number C24025
Used on Carbureted 5.3L engines
Approx 2 3/16"
Good Used Part
|
|
|
|
|
|
|
|
|
|
3.4 3.8 4.2 XK Cylinder Head Breather Stud C6727
|
|
|
3.4 3.8 4.2 XK Cylinder Head Breather Stud
Jaguar part number C6727
On cars with the carbon canister, this is the shorter Stud - About 1 5/8".
Fits all Jaguar engines up to 1987
Good Clean Original Used Part
|
|
|
|
|
|
|
|
|
|
XJS XJ12 Etype Cylinder Head Stud C29435
|
|
|
XJS XJ12 Etype Cylinder Head Stud
Jaguar part number C29435
Used on 5.3L engines prior to the early HE engine.
This is the front stud. Approx 3.5"
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJS XJ12 Etype Cylinder Head Stud C29436
|
|
|
XJS XJ12 Etype Cylinder Head Stud
Jaguar part number C29436
Used on 5.3L engines prior to the early HE engine.
This is the rear stud. Approx 4"
Good Used Part
|
|
|
|
|
|
|
|
|
|
4.2 L Camshaft Sprocket Bolt Setscrew C33918 JZB100042
|
|
|
4.2 L Camshaft Sprocket Bolt Setscrew
Jaguar part number C33918 (JZB100042)
Fits early 4.2L engines to 1987
Good Clean Used Part
|
|
|
|
|
|
|
|
|
|
V12 Waterpump Gasket OEM C29626 EBC9629
|
|
|
Gasket for your Jaguar V12.
Part number C29626 (superseded to EBC9629)
Shown to fit all Jaguar V12 Engines - XKE, XJ12, XJS, XJ40 and X300.
Paper Style Gasket.
New Part.
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XJS Fulcrum Set Screw C17009 JZS100088
|
|
|
Fulcrum Set Screw
Jaguar part number C17009 (JZS100088)
This is the longer of the bolts used on the Fulcrum mounting.
Fits most Early Jaguar Independent Rear Suspensions.
Nice Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XJS Fulcrum Set Screw C17010 JZS100089
|
|
|
Fulcrum Set Screw
Jaguar part number C17010 (JZS100089)
This is the shorter of the bolts used on the Fulcrum mounting.
Fits most Early Jaguar Independent Rear Suspensions.
Nice Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJS XKE Cam Oil Feed Line Banjo Bolt C5846
|
|
|
XJ6 XJS XKE Cam Oil Feed Line Banjo Bolt
Jaguar part number C5846
Fits Early sedans, XKE, XJ6 and XJS.
Good Used Part.
|
|
|
|
|
|
|
|
|
|
Exhaust Manifold Gasket - All 4.2L .. C2318 JA272
|
|
|
Jaguar Exhaust Manifold Gasket.
Payen part number JA272, Jaguar part number C2318.
Fits all 4.2L engines.
New, out of package.
|
|
|
|
|
|
|
|
|
|
XKE XJS XJ12 Intake Inlet Valve - EAC1549
|
|
|
XKE XJS XJ12 Intake (Inlet) Valve.
Jaguar part number EAC1549.
Shown to fit 71-74 XKE, 73-79 XJ12, and 75-81 XJS 5.3 V12.
New in Sealed package.
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XJS Suspension Bolt C17024 JZS100090
|
|
|
XJ6 XJ12 XJS Suspension Bolt
Jaguar part number C17024 (JZS100090)
Special bolt that goes through IRS cage and into the differential.
Used on most pre 92 Jaguar Independent Rear Suspensions.
Nice Used Part.
|
|
|
|
|
|
|
|
|
|
XJ6 XJS XKE Sedan Brake Pedal Pad C21515
|
|
|
Brake Pedal Pad
Jaguar part number C21515
4.5" pad used on XJ6 XJS XKE and some early Sedan Auto models.
Nice Used Part with no wear.
|
|
|
|
|
|
|
|
|
|
XJS XJ12 Etype Cam Tower Stud C30335
|
|
|
XJS XJ12 Etype Cam Tower Stud
Jaguar part number C30335
Used on 5.3L engines prior to the early HE engine.
Approx 4.25"
Good Used Part
|
|
|
|
|
|
|
|
|
|
Jaguar Chrome Molding Clip BAC5298
|
|
|
Jaguar Chrome Molding Clip
Jaguar part number BAC5298
Sold in packs of 10
Used on most Jaguar models from the 60s to the late 80s
to hold interior chrome strips in place.
Good Used Condition
|
|
|
|
|
|
|
|
|
|
XJS XJ12 Etype Cylinder Head Blanking Plate C34283
|
|
|
XJS XJ12 Etype Cylinder Head Stud
Jaguar part number C34283
Used on 5.3L engines.
Good Used Part
|
|
|
|
|
|
|
|
|
|
Jaguar Boot Lid Emblem BD26762
|
|
|
Jaguar Boot Lid Emblem
Jaguar part number BD26762
Fits all early Jaguars prior to 1980.
Good Used Authentic Emblem. All mounting pins present.
|
|
|
|
|
|
|
|
|
|
XJ6 XJS Fulcrum Shaft Distance Tube - C17663
|
|
|
Fulcrum Shaft Distance Tube
Jaguar Part number - C17663
Fits the 420, Etype, XJ6, XJ12 and XJS
Used part. Clean and Straight
|
|
|
|
|
|
|
|
|
|
XKE Top Clamp Assembly Base - BD19515
|
|
|
XKE Top Clamp Assembly (Center) Base.
Part of Jaguar part number BD19515.
Solid, straight, but missing chrome.
Used part.
|
|
|
|
|
|
|
|
|
|
XKE Safety Catch Bracket - BD20320
|
|
|
XKE Safety Catch Bracket.
Jaguar part number BD20320.
Good, used part.
|
|
|
|
|
|
|
|
|
|
3.8 4.2 L Camshaft Bearing Cap C2171
|
|
|
3.8 4.2 L Camshaft Bearing Cap
Jaguar part number C2171
Fits most early Jaguar engines up to 1987.
Normally these are matched to the head, but selling just in case of
loss or damage to the one you have.
Good Used Part.
|
|
|
|
|
|
|
|
|
|
3.8 4.2 L Camshaft Bearing Cap C2172
|
|
|
3.8 4.2 L Camshaft Bearing Cap
Jaguar part number C2172
Fits most early Jaguar engines up to 1987.
Normally these are matched to the head, but selling just in case of
loss or damage to the one you have.
Good Used Part.
|
|
|
|
|
|
|
|
|
|
3.8 4.2 L Crankshaft Main Cap Bolt C2262
|
|
|
3.8 4.2 L Crankshaft Main Cap Bolt
Jaguar part number C2262
Used on Engines prior to 1987
Good Used Part
|
|
|
|
|
|
|
|
|
|
XKE Early Sedan Limiter Rotor DRB111 C25328
|
|
|
XKE and Early Sedan Limiter Rotor DRB111 C25328 Lucas 54417627
For Lucas distributors #41296,
41297, 41323, 41065, 41322. In original Lucas box.
Fits Jaguar MK X
1965-66 w/auto trans, 1967 420G w/auto trans,
1970-71 XKE w/auto trans,
1970-71 XJ6 w/auto trans.
New old stock with shelf wear.
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XJS Etype Flywheel Driveplate Stiffener Plate C6861
|
|
|
XJ6 Flywheel Driveplate Stiffener Plate
Jaguar part number C6861
Fits V12 Etype, XJ12, XJS and 6 cylinder Series 3 XJ6
Good Used Part
|
|
|
|
|
|
|
|
|
|
XKE XJS XJ12 Front Crankshaft Seal - JLM10613
|
|
|
XKE XJ12 XJS Front Crankshaft Seal.
Jaguar part number JLM10613.
Genuine Jaguar Part .
Works with XJ12 73-79, XKE V12 71-74; XJS 76-94 .
New in Sealed package.
|
|
|
|
|
|
|
|
|
|
4.2L Plunger Pin and Spring - C4405 C2297
|
|
|
Jaguar 4.2L Plunger Pin and Spring
Part numbers C4405 and C2297
Good Used Parts
|
|
|
|
|
|
|
|
|
|
XJ6 XJS Lower Shock Mounting Shaft - C17013
|
|
|
Lower Shock Mounting Shaft
Jaguar part number - C17013
Fits the Jaguar IRS used in the 420, E type, XJ6, XJ12 and XJS
Nice used part, straight with good thread.
|
|
|
|
|
|
|
|
|
|
XJ6 Cylinder Head Stud - C29035
|
|
|
XJ6 Cylinder Head Stud
Jaguar part number - C29035
Fits XKE 3.8 & 4.2, XJ6 Series 1, 2 & 3
Approximately 6 3/8"
New in Sealed Packaging.
|
|
|
|
|
|
|
|
|
|
Jaguar Terminal Post C22257 C45021
|
|
|
Jaguar Terminal Post
Jaguar part number C22257 C45021
Fits Jaguar XKE 1965 - 1974, E-Type 4.2 Series 1, Series 2 and Series 3
XKE V12, MKX, 420, XJ6 1969 - 1989 Up To VIN# 556850, XJ40, XJ12 1970 -
1992, XJS 1975 - 1992 Up To VIN# 179736
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XKE Sedan Starter Mounting Plate C22488
|
|
|
XJ6 XKE Sedan Starter Mounting Plate
Jaguar part number C22488
Used on various 4.2L engines including XKE, Early Sedans, and XJ6.
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XKE Speedometer Rev Counter Harness C31578
|
|
|
Speedometer Rev Counter Wiring Harness
Jaguar part number C31578
For Series 1 XJ6 and XJ12, and XKE V12.
Good Wiring and Clean Connectors.
Nice Clean Harness
|
|
|
|
|
|
|
|
|
|
XJ6 XKE Cylinder Head Stud - C29033
|
|
|
XJ6 XKE Cylinder Head Stud
Jaguar part number - C29033
12 5/8 inches in length.
Fits 69-87 XJ6 and 68-71 XKE
New, out of package.
|
|
|
|
|
|
|
|
|
|
XJ6 XKE Cylinder Head Stud - C38073
|
|
|
XJ6 XKE Cylinder Head Stud
Jaguar part number - C38073
13 inches in length.
Fits 69-87 XJ6 and 68-71 XKE
New, out of package.
|
|
|
|
|
|
|
|
|
|
XJ6 XJS Inner Fulcrum Shaft - C17008
|
|
|
Inner Fulcrum Shaft
Jaguar part number - C17008
Fits the Jaguar IRS used in the 420, E type, XJ6, XJ12 and XJS
Nice used part, straight with good thread.
|
|
|
|
|
|
|
|
|
|
XJ6 XKE Horn Push Rod C29321
|
|
|
XJ6 XKE Horn Push Rod
Jaguar part number C29321
Fits Series 1 XJ6 and XJ12, as well as Series 3 XKE
Used part, in excellent condition.
|
|
|
|
|
|
|
|
|
|
4.2L Timing Adjustment Plate - C4404
|
|
|
Jaguar 4.2L Timing Adjustment Plate
Part number C4404
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJS XJ12 XKE Bell Housing Cover Plate C29482
|
|
|
XJS XJ12 XKE Bell Housing Cover Plate
Jaguar part number C29482
Used on early 5.3L engines.
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 XJ12 XKE Turbo Hub Caps - C30283
|
|
|
XJ6 XJ12 XKE Turbo Hub Cap
Jaguar part number C30283
Fit any Jaguar rim that uses a 9" Hub Cap.
Used cap, in great condition. Some minor rust in the creases.
Otherwise very good.
|
|
|
|
|
|
|
|
|
|
4.2L Upper Timing Chain Bracket - C21703
|
|
|
Upper Timing Chain Bracket
Jaguar Part number C21703
Fits Jaguar 4.2 engines to 1987
Good, Used Part.
|
|
|
|
|
|
|
|
|
|
4.2L Eccentric Shaft - C27189
|
|
|
Eccentric Shaft
Fits inside Upper Timing Sprocket
For 4.2L engines to 1987
Jaguar part number c27189
|
|
|
|
|
|
|
|
|
|
XJ6 XKE Crankshaft Pulley - C23131
|
|
|
XJ6 XKE Crankshaft Pulley
Jaguar part number - C23131
Fits Series 3 Etype, and Series 1, 2 and 3 XJ6
5" diameter pulley in good used condition.
|
|
|
|
|
|
|
|
|
|
4.2 L Idler Sprocket Shaft C26608
|
|
|
4.2 L Idler Sprocket Shaft
Jaguar part number C26608
Fits 4.2L engines to 1987
Good Used Part
|
|
|
|
|
|
|
|
|
|
4.2L Front Timing Chain Bracket - C4128
|
|
|
Jaguar 4.2L Front Timing Chain Bracket
Part number C4128
Clean, Used Part
|
|
|
|
|
|
|
|
|
|
4.2L Oil Pump - C21765
|
|
|
4.2 L 6 Cylinder Oil pump
Fits all 4.2L engines from 1956 – 1987
Jaguar part number C21765
Used Oil Pump, In good condition.
|
|
|
|
|
|
|
|
|
|
XKE XJ6 SU Fuel Pump - AZX1307 - Used
|
|
|
XKE XJ6 SU Fuel Pump
SU part number - AZX1307
Fits various applications ...
Jaguar XKE with 4.2L, XJ6 from 69-78
MGB from 65 on, and Austin Healy BN1-BJ8
Used- Extra Clean and Functions. Not tested on car.
Sold as Good Rebuild-able Core.
|
|
|
|
|
|
|
|
|
|
XJ6 XJS Differential Companion Flange RTC1009A
|
|
|
Differential Companion Flange
Jaguar part number RTC1009 or RTC1009A
Used on most early Jaguar Etype, S-type, 420, Mark 10, Series 1-3 XJ, and XJS.
Also fitted to Land Rover.
Not Used with Dana Differentials.
Used Part in Good Condition.
|
|
|
|
|
|
|
|
|
|
XJ6 XKE 4.2L Rear Main Oil Seal C19649 C19688 C19687
|
|
|
XJ6 XKE 4.2L Rear Main Oil Seal Retainer
Jaguar part number C19687 (C19649 C19688)
Seal part number C19654 will need to be replaced, and isn't included.
Retainer parts in good used condition.
|
|
|
|
|
|
|
|
|
|
XJ6 Spin on Oil Filter Housing EAC2425
|
|
|
XJ6 Series 3 Oil Filter Housing
Jaguar Part number EAC2425
This is for the car with the oil cooler fitted. Those pipes can be blanked off if needed.
I've sold many of these to convert the XKE and Early XJ6 to a spin on filter.
|
|
|
|
|
|
|
|
|
|
4.2 L Crankshaft Main Cap Set C21692
|
|
|
4.2 L Crankshaft Main Cap Set
Normally sold with the engine, part numbers include C21692
Removed from a 1985 XJ6, will fit 4.2L engines to 1987
Good Used Set.
|
|
|
|
|
|
|
|
|
|
XJS XJ12 Spin on Oil Filter Housing C42796
|
|
|
XJS XJ12 Spin on Oil Filter Housing
Jaguar part number C42796
Used on the early XJS and XJ12 5.3L engines
Good Used Part
|
|
|
|
|
|
|
|
|
|
XJ6 Piston Connecting Rods - 4.2L RTC2995
|
|
|
XJ6 Piston Connecting Rods
Lot of 6
Jaguar Part numbers
RTC2995
Wide Blade Connecting Rods.
Includes Parts RTC2995, C17164, C32344, and EAC5541
Clean and Straight matched set.
|
|
|
|
|
|
|
|
|
|
XJS XJ12 Etype Automatic Flywheel C37106
|
|
|
XJS XJ12 Etype Automatic Flywheel
Jaguar part number C37106
160 teeth, Originally paired with a 9 tooth Lucas starter, and BW12 transmission.
Good Used Part
|
|
|
|
